How to polish a car: 6 pro tips

Knowing how to polish a car is fundamental for your vehicle to look like new. The good news is that such process can be done both at home or in a repair shop that you trust.

Few things please a car owner more than a shiny and brand new looking car body. The good news is that there’s a simple way to keep your vehicle with the looks of one that just left the dealership at all times: all you need to do is know how to polish it appropriately.

It’s important to note that, even if it’s far from an impossible task, it’s not just about simply applying the polish either. There are some techniques that must be put into practice in order to obtain a good result, and not just a source of frustration. Learn more about this next.

how-to-polish-a-car

How to polish a car?

Learning how to polish a car is something that doesn’t take a lot of time. In a matter of fact, all you need to do is get to know each step of the process and, more importantly, why and how it must be carried out. After doing it a few times it will become some sort of ritual – and, why not, a hobby. Check all the stops in the following:

  • Get a good quality car polish

As obvious as it might seem, the first step to do this procedure right is to get some good quality polish fluid to get the job done. It must be noted that this substance is an abrasive, and that its abrasiveness might vary between very smooth to a medium level. Therefore, it’s a good idea to count on some professional help to make the choice – some stores offer qualified staff, and you should always prefer them.

  • Wash your vehicle

Debris and dirt are the #1 enemy of a good car polish. The reason behind this is that the polish is meant to make damage to the paint less visible, therefore, the fluid must be in direct contact with it. Any particle, as tiny as it might seem, interferes with the process.

Fortunately, there’s a simple way of getting rid of such risk: always wash your vehicle before polishing it. You should also look for any embedded particles: since they don’t come off with regular washing, you’re gonna need to remove them with the help of a special product and a microfiber cloth.

  • Apply the buffing liquid

Before the actual car polish is applied, you need to prepare the clearcoat to receive it. Remember: the goal is to ensure maximum adherence between the car’s body and the polishing liquid.

The best way to do the is to use a rotating pad to spread the buffing liquid on the clearcoat. The pad must be clean and kept humid, in a way that its fibers are completely involved by the fluid.

It must be noted that this step also allows you to know if your car’s paint is in poor condition: if you have a hard time removing it, this means there’s something wrong. Remember: it must come off to the touch of a finger.

  • Use a pad to spread the polish

After the buffing, the time to apply the car polish finally comes. Even if such process should also be done with a rotating pad, it must be noted that it shouldn’t be the same one used on the previous step: it has to be perfectly clean.

According to professionals, you should do it nice and gently. The number of layers applied might vary according to the type of the paint: while one coat does the job in some cases, in others it’s necessary to apply several. But that’s not possible to tell before the procedure: whoever is on charge of it should observe how the body looks and decide if there’s the need to repeat it.

  • Focus on the most damaged parts

Some of the vehicle’s components are more likely to be damaged than others. Since the car polish has the function of hiding them, you should take some time to observe the body and look for the parts that are more damaged. Once they are located, you should give them special attention: they might need more polish than the others.

  • Finish it up

Last but not least, it’s time to finish up the job and check out the result. The good news is that the last step of car polishing is extremely easy: all you need to do is use a soft and clean microfiber towel to remove excess liquid from the clearcoat. When you do so, you should see a mildly oily surface: this means that the task has been done correctly. In other cases, something might have gone wrong.

It must be noted that, even if the whole procedure can be done at home, it’s always better to leave it to a professional. He will have all the tools and products necessary to give you a better result: all you need to do is drive around in your brand new looking car.

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

WhatsApp us